Switchboard Upgrades in South East Melbourne

A switchboard upgrade replaces old fuses or an outdated board with modern circuit breakers and safety switches, and makes room for new circuits like an EV charger, solar or a battery. Ampix upgrades switchboards across South East Melbourne from our base in Springvale, starting from $800. Every upgrade is independently inspected and certified.

Get a free switchboard quote

from $800 · Indicative starting price for a standard switchboard upgrade. Final quote after we inspect your switchboard.

Signs your switchboard is due

  • Ceramic rewireable fuses instead of circuit breakers
  • Breakers or safety switches that trip often
  • Scorch marks, buzzing, a burning smell or a board that feels warm
  • No safety switches (RCDs), or only one for the whole house
  • No spare room for new circuits
  • Plans for an EV charger, solar, a battery, an induction cooktop or air conditioning

How a switchboard upgrade works

  1. 01

    Inspect and quote

    We look at your switchboard, meter panel, wiring and what you plan to add, then give you a clear written quote.

  2. 02

    Replace and test

    With the power safely off, we fit the new board, label every circuit and test the installation before switching back on.

  3. 03

    Independent inspection

    Replacing a switchboard is prescribed electrical work in Victoria, so an independent Licensed Electrical Inspector checks it. We arrange this.

  4. 04

    Certificate of Electrical Safety

    You receive a prescribed Certificate of Electrical Safety, which is also lodged with Energy Safe Victoria.

What a switchboard upgrade costs

A standard switchboard upgrade starts from $800. No two switchboards are the same, so we inspect first and give you a clear written quote before any work starts. These are the things that move the price.

Upgrading at the same time as an EV charger, solar or battery install usually saves a second visit, and lets us size the new board for everything you plan to add.

What affects the price

  • How many circuits the new board needs, including any you're adding
  • Individual RCBOs per circuit versus grouped RCDs
  • The condition of the meter panel, and whether it contains asbestos
  • Whether consumer mains or the main earth need work
  • Surge protection or extra space for future solar, battery or EV circuits
  • Faults found in existing wiring when circuits are tested

Safety switches, done properly

A safety switch (RCD) cuts the power in a fraction of a second if current leaks to earth, for example through a person. A new board brings RCD protection up to the current wiring rules (AS/NZS 3000), spread across several devices so one fault doesn't black out the whole house.

Check who you're hiring

Switchboard replacement must be done by a licensed electrician working for a Registered Electrical Contractor. Ask for the REC number and check it on Energy Safe Victoria's public register. Ours is REC 38026.

Switchboard questions

Adding something new? See EV chargers, solar and home batteries.

How much does a switchboard upgrade cost?

With Ampix, a standard switchboard upgrade starts from $800. The final price depends on the number of circuits, the type of protection you choose, the condition of your meter panel and anything found when the existing wiring is tested, so we inspect first and give you a clear written quote before any work starts.

How long does a switchboard upgrade take?

Most homes are done in a single visit, with the power off for part of the day. If your meter panel or mains need work as well, it can take longer. We'll tell you what to expect when we quote.

Do I need a switchboard upgrade for an EV charger, solar or a battery?

Often, but not always. Each needs its own circuit and protection, and older boards may not have the space, capacity or safety switches required. We check your board when we quote any of these jobs.

Does a switchboard upgrade need to be inspected?

Yes. In Victoria, replacing a switchboard is prescribed electrical work. It must be done by a licensed electrician, checked by an independent Licensed Electrical Inspector, and covered by a prescribed Certificate of Electrical Safety.

What's the difference between an RCD and an RCBO?

An RCD (safety switch) cuts power if current leaks to earth, and usually protects a group of circuits. An RCBO combines a safety switch and a circuit breaker for a single circuit, so a fault only trips that one circuit instead of a whole group.

Are old ceramic fuses dangerous?

Rewireable ceramic fuses offer no earth-leakage protection, and they can be rewired with the wrong fuse wire, which removes their protection. They're a sign the board is due for an upgrade with circuit breakers and safety switches.

What if my meter panel contains asbestos?

Many older meter panels contain asbestos. We'll identify it during the inspection and explain what's needed. Where the panel has to be removed or drilled, it must be handled safely by an appropriately licensed person.

Is your switchboard
due for an upgrade?

Tell us what you have and what you'd like to add. We'll get back to you within one business day.

0405 669 247

Based in Springvale · REC 38026

Get your free quote

Tell us what you need and we’ll get back to you within one business day.

We use your details to respond to your enquiry. No obligation.